Thumbnail Filmstrip of OSD Audio ICE660 6.5" Angled LCR In Ceiling Speaker, 150W, Home Theater, Single Images
The OSD Audio ICE660 is a 6.5 inch angled in-ceiling speaker designed to solve a common home theater problem: where to put the front speakers when on-wall and in-wall placement are not an option. Its woofer is fixed at a 15 degree angle, so the critical mid and high frequencies are pointed toward the listener rather than the floor.
Because the sound is angled, the ICE660 can be mounted within about a foot of the wall, right above your TV or screen. Standard in-ceiling speakers usually need to be at least three feet from the wall. The result is a more realistic sound image, with sound that tracks with the action on screen. It also gives smaller and odd shaped rooms more placement options.
Use the ICE660 as a left, center or right front speaker, as side or rear surrounds in a 5.1 or 7.1 system, or as overhead height speakers for immersive 3D surround formats. A 6.5 inch polypropylene woofer with rubber surround and a 1 inch pivoting silk dome tweeter deliver 50Hz to 22kHz response with 92 dB sensitivity and 150 watts of power handling.
Built-in dog ear clamps grip the drywall as you tighten the screws, so no mounting brackets are needed for retrofit installs. The snap-in grille can be spray painted to match your ceiling, and gold-plated 5-way binding posts make wiring simple. This is a passive speaker and requires an AV receiver or amplifier.
Check the Fit
Needs a 8.12 inch cutout and 5 inches of clearance above the ceiling; paintable grille is 10.5 inches across. Replacing speakers? Measure the old hole first. Dog ear clamps, no brackets needed. Sold as single
Key Features
- Angled For Better Imaging: 6.5 inch woofer is fixed at a 15 degree angle so sound is aimed at the listener, not the floor, creating a realistic front stage from the ceiling
- Place It Near The Wall: Mount within about a foot of the wall right above your TV, where standard ceiling speakers need about three feet of clearance; great for small or odd shaped rooms
- Flexible Home Theater Use: Works as left, center or right front speakers, as side or rear surrounds in 5.1 and 7.1 systems, or as overhead height speakers for immersive 3D surround
- High Output: 92 dB sensitivity and 150W power handling with 8 ohm impedance work with most AV receivers; 1 inch pivoting silk dome tweeter adds detail and focus from 50Hz to 22kHz
Technical Specifications
- Speaker Type: 6.5" Angled LCR DolbyAtmos® Ready Ceiling Speaker
- Woofer: 6.5" Polypropylene Cone with Rubber Surround, Fixed at a 15° Angle
- Tweeter: 1" Pivoting Silk Dome
- Frequency Response: 50Hz - 22kHz
- Power Handling: 150W
- Sensitivity: 92 dB
- Impedance: 8 Ohms
- Dolby Atmos® - Ready for True 3D Surround Sound
- Can be Placed Within a Foot of the Wall
- Spray Paintable Snap-In Grille Included
- Inputs: Gold-plated 5-way Binding Posts
- Install-friendly Dog Ear Installation Brackets
- See New Construction Brackets For Compatibility
- Diameter & Depth: 10.5" x 5"
- Cutout Diameter: 8.12"
- Sold As: Single
- Warranty: 10 Years