Thumbnail Filmstrip of OSD Nero XC1 Stereo Amplifier with DAC & Touch Display, 70W x2 @ 8 Ohms, HDMI ARC for TV, MM Phono Images
A complete hi-fi system in one compact aluminum chassis. The Nero XC1 combines 70W x2 into 8 ohms (135W x2 into 4 ohms) of high-current Class-D power, a reference ESS Sabre DAC, an audiophile XMOS USB engine, and eight inputs (including balanced XLR, MM phono, and HDMI ARC), all controlled from a brilliant 5.2" XC-Touch display. Just add speakers.
Key Features
- REAL POWER, COMPACT SIZE: 70W x2 into 8Ω and 135W x2 into 4Ω, both channels driven, from an Infineon MERUS multi-level Class-D output stage with >8A continuous current
- REFERENCE DAC: ESS Sabre ES9038K2M with an XMOS XU316 USB engine. PCM up to 768kHz/24-bit, native DSD512, DoP256, ASIO support
- EIGHT INPUTS: balanced XLR, RCA line, MM phono with ground post, coaxial, optical, USB-C, HDMI ARC, and Bluetooth 5.0 with aptX HD
- XC-TOUCH DISPLAY: 5.2" touchscreen with analog-style meters, dual VU meters, and a full-band spectrum analyzer
- PURE SIGNAL PATH: fully DC-coupled design, WIMA MKP film output capacitors, and a Direct mode that bypasses tone and balance controls
- MEASURABLY CLEAN: THD+N below 0.0065%, 102dB SNR, and a damping factor of 200 for tight, controlled bass
- SUBWOOFER READY: variable RCA pre-out for a powered subwoofer or external power amplifier
- 2-YEAR LIMITED WARRANTY
Overview
The OSD Nero XC1 is built for listeners who want serious high-fidelity performance without a rack full of separates. At just 10.4" wide, it replaces a stereo amplifier, preamp, phono stage, DAC, and Bluetooth receiver in a single black anodized aluminum chassis that fits on a desk, a media console, or a bookshelf.
The amplifier section uses an Infineon MERUS multi-level Class-D output stage, chosen for its high efficiency and low switching noise. The voicing, a fully DC-coupled path with a benign, mostly low-order distortion character, delivers the warmth listeners associate with classic Class-A/B designs while the unit stays cool and compact. With no coupling capacitors in the audio path and WIMA MKP film capacitors in the output filter, the signal stays clean from input to speaker terminal. A damping factor of 200 keeps woofers firmly under control for articulate bass and crisp transients.
The digital front end is equally serious. Connect a Mac or PC to the USB-C input and the XC1 becomes a reference desktop DAC: the XMOS XU316 interface feeds an ESS Sabre ES9038K2M converter for bit-perfect playback of your entire hi-res library, up to 768kHz/24-bit PCM and native DSD512. It works plug-and-play on Windows, macOS, Linux, Android, and iOS.
Every source has a home. Plug your TV into HDMI ARC for instantly better TV sound, connect a turntable straight to the built-in MM phono stage, run balanced XLR from a streamer or preamp, or stream from your phone over Bluetooth 5.0 with aptX HD. Add a powered subwoofer through the variable pre-out for full-range 2.1 sound.
Front and center, the 5.2" XC-Touch display shows your source, volume in dB, and the detected sample rate, with three meter views to bring the music to life. A machined gold volume knob with a dimmable illuminated light ring and an included IR remote put precise control at your fingertips.
What's in the Box
- OSD Nero XC1 integrated amplifier
- Detachable AC power cord
- Bluetooth antenna
- Infrared remote control
- Safety & Quick Reference card
Note: The XC1 does not have a headphone output. The rear voltage selector is not auto-ranging and must be set to match your local line voltage before connecting power.
Technical Specifications
- Output Stage: Infineon MERUS multi-level Class-D
- Power Output: 70W x 2 into 8Ω, 135W x 2 into 4Ω (1% THD, 2 channels driven)
- Continuous Output Current: >8A RMS
- THD+N: <0.0065% (1kHz, 2 x 5W into 8Ω)
- Signal-to-Noise Ratio: 102dB, A-weighted
- Frequency Response: 10Hz to 20kHz ±1dB; 5Hz to 50kHz ±3dB
- Input Sensitivity: 525mV for 55W into 8Ω
- Voltage Gain: 32dB (x40)
- Crosstalk: >68dB at 1kHz (2 x 5W into 8Ω)
- Damping Factor: 200 (output impedance 0.04Ω)
- Signal Path: Fully DC-coupled; WIMA MKP film output-filter capacitors
- DAC: ESS Sabre ES9038K2M (stereo)
- USB Interface: XMOS XU316 (xcore.ai)
- USB Input: USB-C, USB Audio Class 2.0 (UAC 1.0 compatible); PCM to 768kHz/24-bit, native DSD512, DoP256; ASIO support
- USB OS Support: Windows, macOS, Linux, Android, iOS (driver may be required on Windows for highest rates and ASIO)
- Digital Inputs: Coaxial RCA; Optical TOSLINK (24-bit/192kHz)
- HDMI: 1x HDMI ARC (PCM 24-bit/192kHz)
- Analog Inputs: 1x balanced XLR, 1x RCA line, 1x RCA phono (MM) with ground terminal
- Bluetooth: Bluetooth 5.0; SBC, AAC, aptX, aptX HD, aptX Low Latency; range up to ~50 ft (15m)
- Outputs: 1x variable RCA pre-out; stereo speaker binding posts (4 to 8Ω); no headphone output
- Display: XC-Touch 5.2" touchscreen, 1280 x 416 (analog meters, dual VU meters, spectrum analyzer + full menu)
- Volume Range: 0 to -80dB in 1dB steps; MUTE below -79dB
- Tone Controls: Bass and treble EQ, L/R balance; Direct mode bypass
- Auto Standby: 20, 60, or 120 minutes, or Always On
- Remote: Infrared remote included
- AC Input: 100 to 120V / 60Hz or 220 to 240V / 50Hz, manually switched
- Fuse: T16A / 250V (not user-serviceable)
- Power Consumption: <0.8W standby, 10W idle, 350W max
- Finish: Black anodized aluminum
- Dimensions (W x H x D): 10.4" x 2.5" x 8.1" (265 x 63 x 207mm), incl. feet, knobs, and terminals
- Weight: 4.9 lbs (2.2 kg) net; 6.0 lbs (2.7 kg) gross
- Warranty: 2-Year Limited