
Thumbnail Filmstrip of OSD Nero 2.1-Channel Amplifier, 2x100W + 200W Sub, RCA Input, Tone & Subwoofer Controls XSP2.1 Images
- AUDIOPHILE, CLASS D TV OR OUTDOOR AUDIO AMP: A powerful and affordable 2.1-channel, Class D amplifier rated at 2 x 100 Watts (4 ohms), and 1 x 200W (4 ohms), all channels driven.
- Subwoofer cross-over, phase and level controls to ensure perfect integration with a subwoofer.
- 12V TRIGGER: Control for remote power on/off.
- Tone controls to allow custom sound settings.
- Analog RCA input for simple connection to a source such as a TV.
Audiophile, high-powered, low-noise and distortion, 2.1-channel amplifier.
Applications include:
A great alternative to an ugly or low-performance sound bar for your big screen TV. Simply connect the amp to the headphone output of the TV and then connect to your speakers – either in-wall or normal box speakers – and add a subwoofer. The sound will be much better, and with in-wall subwoofer and speakers the look is much nicer.
This is also the perfect amp for an outdoor system that comprises main speakers and a passive subwoofer. 200 watts are available to power a subwoofer and 100 watts for each of two patio speakers.
The XSP2.1 can easily achieve the high sound levels of over 100dB from all channels. The additional convenience of tone controls means you can fine-tune or customize the sound to suit your taste.
You can also use this amp to bring back to life an old sat/sub system where the amp has failed – not uncommon. Simply bypass the built-in amp and connect the speaker to this amp and you have a working system again.
Technical Specifications
- Amplifier Type: 2.1 Speaker and Subwoofer Amplifier
- Design Type: Class D
- Power Handling:
- Speakers:
- 2x 100W RMS / 2x 200W Peak @ 4Ohms
- 2x 50W RMS / 2x 100W Peak @ 8ohms
- Subwoofer:
- 200W RMS / 400W Peak @ 4ohms
- 100W RMS / 200W Peak @ 8ohms
- Speakers:
- Frequency Response:
- Subwoofer: 20Hz - 200Hz
- Speakers: 20Hz - 200KHz
- Impedance: 4 & 8 ohm
- Signal to Noise Ratio: 90dB
- Crossover: 40Hz to 150Hz (Subwoofer)
- Phase Control: 0-180° (Subwoofer)
- Controls:
- Subwoofer: Crossover, Phase, Gain
- Speakers: Bass & Treble
- RCA Low Level Inputs
- 12V Trigger In/Out
- Auto Sensing
- Power Supply: Swithable 1-240V 50/60Hz Input Voltage
- Dimensions: 16.92" x 9.0" x 2.46"
- Weight: 6lbs
- Warranty: 2 Years