6 Zone Multi-Room House-wide Audio System Kit Includes - 350-Watt 2 Channel Amplifier, 6x Pair High Power Speaker Selector, & 6 100-Watt Impedance Matching Speaker Volume Control Kit

Quick Overview

Create your ultimate 6 zone multi-room/ house-wide audio system kit! It includes: the OSD Audio AMP300 which is a heavy-duty 350-Watt A/B two-channel dual source amplifier for use as a remote or single amplifier. The ISS6 will allow you to run as many zones as you choose at a given time, whether it's running all of them simultaneously or deactivating some and running speakers in just one or two zones. You also get six (6) impedance-matching volume controls that lets you adjust the volume of a pair of speakers independently of other speakers within a whole house audio system.

Details

Amplifier Features

A solid high-power amplifier does more than make the sound you love louder. A well-built power amp cleans up sound quality, improves bass response and delivers the right amount of power to efficiently drive multiple speakers in distributed audio system or home theater. Our AMP300 is a flagship amp that sells well for a reason. This 350-Watt A/B two-channel dual source amplifier is ideal for use as a remote amplifier to power your whole house audio system or as a single amp for a dedicated home theater or media room, and you won’t find an amp with the same features that we pack in at such an affordable price. It is stable at 2 ohm load.

Dual Source Switching
The AMP300 also includes dual source switching to connect two audio sources and toggle between them for greater listening flexibility. Automatic source switching switches between connected sources with a priority signal-sensing feature, so if a DVD player is connected to input 2, then you decide to stream a movie through a game console, when the console is turned on, the AMP300 automatically switches to that source. The AMP300 also includes a variable delay control that lets you adjust the amount of time needed to "listen" for a signal from your main input, between 3 and 15 seconds. This prevents gaps between music tracks from accidentally switching your inputs. This high power amplifier includes two RCA signal level inputs so with the addition of an RCA-to-mini stereo cable (sold separately), you can connect your smartphone or other device. Plenty of Power for the Price Pair our AMP300 with the power-hungry speakers, and the sound quality will transform your listening experience. Rated at 350 Watts per channel peak power (470 Watts Bridged Mono into 8 ohms), the AMP300 can be configured as bridged or stereo. In bridged mode, you can combine the left and right channels into one audio channel which bumps up the power to a whopping 470 Watts (8 ohms). When playing dual sources, switch to stereo mode which reduces the power to 350 Watts per channel. It is the only high current 2 ohm load stable amp in the market.

Price-defying Features
The AMP 300 also includes two sets of speaker outputs with front panel controls, auto-on signal sensing or 12-volt trigger, rear panel master level controls, dual line-level inputs with priority override switching and dual voltage of 110V/220V and auto signal sensing. This amp has a clean, brushed metal front panel with a volume control, power on and off button and a balance control knob to adjust the balance between the left and right channels and dial in just the right sound level mix. Built-in, illuminated dual voltage meters allow you to monitor the volume level readings, while special protection circuitry safeguards the amp from a short circuit.

Additional Amplifier Specifications
  • A heavy-duty 350-Watt A/B two-channel dual source amplifier for use as a remote or single amplifier
  • Ideal for powering whole-house audio system or dedicated home theaters
  • Equipped with 350 Watts per channel peak power, 470 watts Bridged Mono into 8 ohms
  • Dual source capable for greater listening flexibility
  • Clean, brushed metal front panel with a volume control, power on/off button and balance control
  • Includes built-in illuminated dual voltage meters to monitor volume level readings
  • Protection circuitry safeguards the amp from a short circuit
  • Can be configured as bridged or stereo amp
  • Speaker Selector Features

    The OSD-ISS6 Speaker Selector High Power 6 Pair will allow users to run as many zones as they choose at a given time, whether it's running all of them simultaneously or deactivating some and running speakers in just one or two zones. Individual On/Off selectors for every zone distributes one stereo speaker-level signal to eight, six or four stereo listening zones. You can run 140 watts per channel total input power without engaging the manual protection, or 70 watts per channel when the protection is engaged. With the OSD-ISS6's impedance protection, one amplifier can safely power several pairs of speakers. The OSD-ISS6 Speaker Selector High Power 6 Pair comes with a warranty good for five years.

    Ugraded Model with Improved Input/Output Connectors!
    The upgraded, European-style removable input/output connectors offer better leverage when terminating cable and accept up to 14 gauge cable. The ISS’s feature 16 gauge steel construction with our durable black wrinkle powder coating and gray silk-screening. Each unit is provided with an in-depth instruction sheet and die cut labels that fit the recessed area on the buttons for labeling each zone. The 8.5" chassis width of the ISS6 combines with other 8.5" wide OSD Audio components (which will be available in the future) to make a standard 17" wide unit.

    Volume Control Features

    OSD Audio’s SVC100 is an impedance-matching volume control that lets you adjust the volume of a pair of speakers independently of other speakers within a whole house audio system. Ideal for areas such dining or conference rooms where you may want softer volumes or for saunas or garages where you may want higher volumes, the SVC100 maintains the full hi-fi audio frequency response with no low frequency roll-off. Equipped with the same features of volume controls that cost twice as much, the SCV100 is rated at 100 Watts peak and includes adjustable jumpers to add up to eight pairs of 8-ohm speakers simultaneously. The impedance-matching feature helps stabilize the ohm load going back to the amp or receiver to avoid overheating and damaging expensive equipment. A complete volume control kit that fits into a standard single-gang box, the SVC100 also includes the junction box, screws and assorted color trim plates (white, ivory and almond) so you can choose the color that best matches the room. This versatile whole house volume control is compatible with almost any dedicated audio zone or whole house system, and the 12-step rotary knob adjusts the volume from inaudible to loud and everything in between.

    What Is Impedance Protection?
    Speakers are specified by impedance, which is a measurement of resistance to alternating current, and a common value for speakers is 8 ohms. When you’re connecting multiple speakers to a receiver or amplifier, you need to stay above the amp’s minimum load requirements because going below the impedance rating can overheat or even damage expensive equipment. The SVC100 allows you to match the impedance with the number of speakers being controlled with the capabilities of your amp. A basic multi-room system will typically have an amplifier/receiver, a speaker selector, four to eight pairs of speakers, and volume controls. Impedance-matching volume controls feature three settings depending on how many speakers you are connecting. For one to two pairs of 8-ohm speakers, the setting is 1/2x; for three or four pairs of 8 ohm speakers, the setting is 4X. Keep in mind that volume controls do not add gain (volume) to your speakers but simply attenuate the volume up or down. During setup, you'll set the source volume to its optimum level, then the volume control turns the sound down to inaudible levels.

    Additional Volume Control Specifications
  • Decora style impedance-matching volume control for whole house audio systems and dedicated audio zones. Rated at 100 Watts per channel with minimal bass roll-off
  • Impedance-matching feature stabilizes the ohm load so parallel connections of multiple volume controls can be installed without damaging the amplifier
  • Front-mounted adjustable jumpers allow easy adjustment when multiple pairs of speakers are connected to a single receiver or amplifier
  • Accepts up to 14-gauge wiring and fits in a standard gang box with a depth of 2.9”
  • Includes junction box and screws as well as white, ivory and almond trim plates to match any room décor
  • Precision electronics provide low distortion and a ruler flat frequency response
  • 12-step linear rotary-style knob for a wide range of listening volumes
  • Installs easily and works with almost any audio system

  • Additional Information

    Manufacturer OSD Audio
    Model Number OSD-6-ZONE-KIT
    Specifications
    • Amplifier Specifications
    • 350 Watts per channel peak power, 435 watts Bridged Mono into 8 ohms
    • High Current Class A/B Power Amplifier (2 ohm Stable)
    • High Output Toroidal Power Supply, High Capacitance and Ample Internal Heatsink
    • Unique Automatic Dual Source Priority Switching with Speaker Level Input Option
    • Right and Left back panel Gain Controls
    • Three turn on Options: manual On, Music Sensing and 12 Volt Trigger (in/out)
    • Ideal Power Amplifier for Custom Home Whole House Audio Systems
    • A and B Speaker Output
    • 2-Year Warranty
    • Speaker Selector Specifications
    • Power handling capacity: 140 watts RMS/Channel
    • Control audio in four Six and set the volume of any pair independently
    • Listen to one or any combination of speakers at one time.
    • Impedance protection allows a single amplifier to safely power several pairs of speakers.
    • Low-profile design with individual on/off selectors for each zone
    • No power required for easy installation.
    • Size: 17"W x 4 1/2"D x 1 3/4"H
    • Warranty: 5 years
    • Volume Control Specifications
    • Impedance matching volume controller with Autoformer
    • Power handling: 100W per channel
    • Frequency Response 20Hz - 20kHz
    • Impedance matching for 2, 4 or 8 pairs of speakers and can be used as non-impedance matching if leaving default on jumper setting at 1X
    • Steps: 12 (make before break)
    • Total Attenuation: 42 dB (Max)
    • Includes White, Ivory and Almond Plates, Inserts and Knobs
    • Fits in a standard gang box
    • Measures 4.125cm W x 6.35cm H x 6.35cm D
    • 5-yr warranty
    • 6 included in this kit
    Condition New
    UPC 819603013993